ELAFLEX CHEMICAL HOSE ASSEMBLIES FOR THE GCC
Hoses assemblies manufactured to exacting quality standards by Elaflex in Germany.
Elaflex Distributor for GCC
Rubber Chemical Hose Assemblies & Rubber Expansion Joints.
Design & Manufacturing
Full in-house design & manufacture to EN / ASME / PED.
ISO14001 Accreditation
FlexEJ has an accredited Environmental Management System.
Elaflex Chemical Hose & Fittings
Elaflex PAL
Elaflex PAL
Elaflex PAL
Elaflex PAL
Elaflex PAL
Elaflex PAL
Elaflex PAL
Elaflex PAL
Elaflex PAL
Elaflex PAL
EN 12115:2011 chemical and pharma hoses manufactured to exacting quality standards by Elaflex in Germany. The hoses are available with a very extensive range of end fittings and accessories to suit every installation and requirement.
PRODUCT GUIDE
Chemical Hose
WHAT IS ELAFLEX CHEMICAL HOSE?
Things to consider….
Hose Lining
Seamless lining with 10 different rubber compounds.
CONSTRUCTION
Braided reinforcement with UV and abrasion resistant covers.
Temperature
-40°C up to +150°C, typically PN6 to PN16.
Fittings
Huge range available with a very high quality hose clamping system.
Features of the Elaflex Chemical Hose
Type D: hoses and hose assemblies for delivery duty only
Type SD: hoses and hose assemblies for suction and delivery duty
Burst pressure is 4x nominal pressure
Electrical conductivity – Ω or M-hoses, since 2011 also Ω/T, M/T
The Elaflex Chemical Hose Range
FlexEJ’s Elaflex Chemical Hose range for the UAE:
Elaflex PAL – CHD/CHS (Ω/T)
PN 16, temperature -40°C – 100°CEPDM, black, smooth, seamless, electrically conductive liner with textile braids (CHS with galv. Steel helix) reinforcement. EPDM cover, electrically conductive, resistant against ozone. Application: general acids like hydrochloric acid and alkali like sodium hydroxide. Not useable at all for oily products.
Elaflex PAL – Tecnopal (Ω/T)
PN 16, temperature -40°C – 100°CEPDM, black, smooth, seamless, electrically conductive liner with textile braids (form SD with additional galv. steel helix) reinforcement. EPDM cover, electrically conductive, resistant against ozone. Application: general acids like hydrochloric acid and alkali like sodium hydroxide, acetates, aldehydes, esters, ketones, hot water. Not useable at all for oily products.
Elaflex PAL – LMD / LMS (Ω/T)
PN 16, temperature -20°C – 80°CNBR 2 special liner, blue, smooth, seamless, electrically conductive with textile braids (form LMS with additional galv. steel helix) reinforcement. NBR/PVC special compound (DN63 and larger- chloroprene CR) cover, black, electrically conductive, ozone resistant , UV resistant. Application: Chemical hose for alkalis, acids, acetates, aldehydes, amines, esters, and ketones. not suitable for aromatic, aliphatic, halogenated hydrocarbons and their derivatives.
Elaflex PAL – Solvapal (Ω/T)
PN 16, temperature -20°C – 80°CNBR 2 special lining, blue, smooth, seamless, electrically conductive with textile braids (form SD with additional galv. steel helix) reinforcement. Special compound cover, ozone-, UV- and flame- resistant, electrically conductive. Application: Solvent hose for most solvents, paints (also water- based), water lacquer, petroleum products, alcohols, aldehydes, esters and ketones. In short term operation also suitable for aromatic and chlorinated hydrocarbons.
Elaflex PAL – UTD/UTS (Ω/T)
PN 16, temperature -30°C – 100°CUPE, white, with conductive OHM spiral stripe, smooth, abrasion resistant liner, no discoloration, conductive, meets FDA regulations with thermoplastic braids (UTS with galv. steel helix) reinforcement. EPDM (EPT) cover, black, conductive, ozone resistant, UV resistant, flame resistant. Application: universal hose, solvents up to 100% aromatic content, acids and alkalis, suitable for AdBlue, not for brominated hydrocarbons and sulfuric acid of more than 75% concentration.
Elaflex PAL – Polypal Plus (Ω/T)
PN 16, temperature -30°C – 100°CUPE, black, smooth, electrically conductive liner with textile braids (form SD with additional galv. steel helix) reinforcement. EPDM cover, black, conductive, ozone resistant , UV resistant. Application: universal chemical hose with seamless black conductive UPE lining. For almost all liquid and pasty chemical and petroleum based products and solvents.
Elaflex PAL – Elaflon Plus FEP (Ω)
PN 16, temperature -30°C – 100°CFEP, seamless, transparent, smooth bore, electrically non- conductive liner, meets FDA regulations with textile braids, form SD additionally with galvanised steel helix reinforcement. EPDM cover, electrically conductive, lightgrey with OHM- conductive stripe (up to DN50) or black (DN63- DN100), abrasion, flame and weather resistant. Application: universal hose for nearly all media.
Elaflex PAL – Elaflon PTFE (Ω/T)
PN 16, temperature -30°C – 150°CPTFE, electrically conductive, black, seamless, smooth bore liner, meets FDA regulations with high- tensile, temperature resistant, textile braids (form SD additionally with galvanised steel helix) reinforcement. EPDM cover, electrically conductive, black, abrasion, flame and weather resistant. Application: universal hose for nearly all media, electrically conductive.
Elaflex PAL – Chemopal (Ω/T)
Hose subheader goes hereCIIR (Chlorobutyl rubber), black, smooth, seamless liner, electrically conductive, diffusion resistant with textile braids (form SD with additional galv. steel helix) reinforcement. CR (Chloroprene) cover, black, electrically conductive, ozone resistant, UV resistant. Application: Chemical hose for alkalis, acids, acetates, aldehydes, amines, esters, and ketones. Not suitable for aromatic, aliphatic, halogenated hydrocarbons and their derivatives.
Elaflex PAL – Polypal clean PCD/PCS (Ω/T)
PN 16, temperature -30°C – 100°CUPE bright, with OHM conductive stripe liner, no discoloration, abrasion resistant, electrically. conductive, meets FDA regulations with textile braids (SD with addl. galv. steel helix) reinforcement. EPDM light-grey cover, ozone-, UV- and flame- resistant, electrically conductive. Application: as Chemopal above but with clean rubber compounds, for foodstuff, cosmetics etc. rubber confirms to FDA.
Electrical Performance
M – conductive ≤10^2 Ω
Hose lining is conductive due to Metallic connections of the metallic hose parts (helix, copper wire) with the metal couplings, no conductivity through the hose wall itself.
Ω – conductive ≤10^6 Ω
Hose lining is conductive due to at least one conductive rubber layer (liner or cover Ω-C), no conductivity through the hose wall itself
M / T – conductive EN 12115:2011 ≤ 10^2 Ω
M-hose and conductive through the hose wall (≤ 10^9 Ω)
Ω / T – conductive EN 12115:2011 ≤ 10^6 Ω.
Ω – hose and conductive through the hose wall (≤ 10^9 Ω). This is the safest hose in terms of avoiding the formation of sparks under all conditions.